In order for the lights and appliances to work in your home, tan vu phat you need electricity. This system is usually made up of circuits that sometimes get tripped or blown if there is too much power going through it. If this happens, there are some things that you need to do to restore the power to the dead circuits.
When you are making electrical repairs on the circuit after it has been tripped, you need a list of where the circuits and the branches are so that you know which is responsible for each area of the home. To make this process easier, you can switch each circuit breaker to “off,” then check everything that is plugged into each outlet. Once you have figured out what works on each circuit, you need to make that list and keep it by the main panel.
Sometimes, when you turn the circuits off, it is obvious what does not work as a sputtering sound or a small flame may come from the outlet or electrical device. If this happens, immediately unplug the device and check the panel with a flashlight so that you can see which one has been tripped. Unplug everything that is on that circuit so that you can check them all individually to see if there are others that do not work.
After this, you may need to replace the fuse and then make sure that the breaker is reset properly. If the circuit does not trip again when you reset it, then it may be that one of the units that is connected to that circuit may be broken. At this time, you should check for any possible short circuits. If you don’t find any, then your problem may be too much current on that particular circuit and you may have to permanently unplug some of the units from that circuit.
If there are still problems with the new breaker, the problem may be one of more of the appliances that are still connected or possibly the cable. Check each one of the appliances that are plugged in until you find the problem. If you find that it is the wiring, you will need to call a professional electrician to perform your electrical repairs.
For the most part, you should not have any trouble with the circuit breaker, but sometimes it does happen, resulting in a circuit that will not be able to support the current that is going through it. If there is a problem with the circuit breaker, it will emit a smell similar to burning plastic. If the handle does not feel right or makes funny noises when you go to move it, turn it all off, check the breaker, and have it replaced, if needed.
Because it can be dangerous to fix electrical systems, it may be beneficial to your home or business to call a trained professional electrician to perform your electrical repairs. Your safety could depend on it.